What do stormtroopers wear

Additionally, the sealed helmet helps protect their head and body, while an attached oxygen tank can provide up to 20 minutes of oxygen. In theory, this allows Stormtrooper survivors to be retrieved after their ship explodes Stormtrooper armor is designed to make these soldiers look similar from top to bottom. Because of this, many people assume that all parts of the armor function in a similar way. However, not all armor is created equal, and some parts of this armor are designed to be more powerful than other parts.

In this case, the chest armor is more powerful. Like the Dark Knight, they also made the chestpiece the most reinforced and powerful part of the armor. This makes sense, of course: Rebels and other enemies that are taught to aim for this area on other enemies get a rude surprise when Stormtroopers are able to take a shot and keep on attacking!

As we mentioned, they were rather infamously taken out in hand to hand combat by characters like Jyn Erso and Chirrut Imwe. All of this makes it that much more surprising that Stormtrooper armor is designed to help them in hand-to-hand fighting. In older stories, this was the result of some personal shield generators more on these in a moment. In addition to the sturdiness of the armor itself, the generators made it possible for the Stormtroopers to withstand the kinds of weapons they would see in hand to hand combat such as vibroblades.

However, even a fully-powered shield was never a match for a lightsaber, and troopers knew to avoid such combat with Jedi. Stormtrooper armor included personal shield projectors.

These projectors had a very specific function: they were primarily designed to defend Stormtroopers fighting in open areas where they could not count on cover. These were mostly used for specialized missions, so Stormtroopers who were posted to planets or bases for a long time typically did not have them.

Similarly, the Empire did not provide projectors if they felt an area had enough cover for the Stormtroopers to dodge incoming fire. Finally, many rookie troopers did not really know how or when to use the projectors, meaning that we rarely got a glimpse of this cool tech. If we did, certain movies might have had a very different ending! The idea that Stormtroopers are terrible shots is well-entrenched in our pop culture mythos.

As Obi-Wan noted, Stormtroopers are very precise, and they get help from some truly fancy targeting systems. The earliest Stormtrooper helmets had the vision enhancements we mentioned such as night vision, infrared, and a HUD. This adds up to some pretty accurate Stormtroopers who are rightly feared across the galaxy!

Captain Phasma and The Force Awakens helped to establish that there are women in the First Order, as Stormtroopers and in other roles as well. Clearly, the First Order did not have any specialized female trooper armor. As it turns out, this is a holdover from the days of the Empire. Inside the Star Wars universe, there have actually been Imperial propaganda posters featuring similar images, but they do not accurately portray female armor: that Stormtrooper body glove fits men and women alike just fine, removing the need to create any kind of special design.

Relatively speaking, the change is mild: you can still hear that there is a human underneath the helmet instead of something like a droid. However, the vocoder makes their voices all sound mechanical and more processed than their normal speech. Altogether, this accomplishes the same function as their uniforms: it gives the impression that they are all the same, showing enemies of the Empire that the uniform faces and voices of Stormtroopers will soon patrol their planets as conquerors in the name of the Emperor.

The sum effect makes Stormtroopers a deadly force for the Empire, and one of the primary reasons they were able to bring so many planets under their control. The original batches of Clone Troopers bred and trained in Kamino were instructed by Mandalorian warriors. It was also natural to model the troopers armor after the famed Mandalorian Armor. Not only were the instructors familiar with the armor, its versatility and lethal capabilities were already known galaxy wide.

While the movie watching public first witnessed a female Stormtrooper during A Force Awakens with the introduction of Captain Phasma, there has been no lack of females among the Stormtrooper ranks.

While the original clone army was purely male, as the Empire moved to conscripted warriors, women were accepted. According to Servants of the Empire: Rebel in the Ranks , a Rebels junior novel, females would be pooled into their own units. Once donning their armor though, it is impossible to differentiate them among other troopers. While there have been varying design configurations of Stormtrooper armor, the most famous remains that of A New Hope.

The iconic white armor was the Empire's first step towards increased uniformity and loyalty post the Clone Wars. This new armor was designed as an improvement of the Phase II Clone Trooper armor, and was composed of 18 overlapping panels, as well as two boots.

The individual panels are made out of plastoid composite plates. Along with the boots, this plate arrangement was chosen for increased mobility. Although Stormtrooper armor would change throughout the years, this plate arrangement would see little variation.

Along with the traditional 18 pieces of armor that would make up the Stormtrooper's iconic plate arrangement, each individual would wear a black body glove underneath. Beyond sealing the wearer's body against the outside environment and creating a vacuum seal, which would make the entire armor airtight, the body glove also had an internal temperature apparatus. As such, Sandtroopers would not have to worry about the sweltering heat, as their bodies would always be cool.

The same would go for any Stormtrooper, as the system would keep them either warm, cool, or pleasantly humid as the situation and climate would dictate. So next time you see a slew of Stormtroopers being sucked up into the void when a ship losses vacuum, just know that they have a 20 minute window to get saved.

Without any Leia "Mary Poppins flying through space" type of plot shenanigans. The true genius of George Lucas's "Star Wars" phenomenon wasn't just the movies. The genius of his plan was the complete and total investment into licensing -- the crown jewel of this being the toy division. With any idea as successful as the Star Wars toy line, you have to come up with ways to stretch out your product.

There was no better way of doing this than creating specialized Stormtrooper armor for specific extreme environmental conditions. Not only did this add a flare to the enemy troopers, it also opened the imagination to countless special forces. Part of the advantages of having your army wearing high protective but cumbersome armor is the ability to integrate systems that would otherwise be impossible in a uniform.

The armor then, is much more than just protection against enemy fire, it is also protection from the environment. While there are specialized armor configurations designed for the harshest of conditions, all Stormtrooper helmets had a built-in filtration system to make inhospitable atmosphere breathable. This effectively made Stormtroopers invulnerable to most types of chemical attacks, as well as allowing them to navigate low oxygen terrains or areas with a high degree of manufacturing produced toxic gasses.

The vocoder direct speaker interface was on the "chin" of the helmet, between two Bliar induction filters. Near the back of the helmet was a auto-seal conduit. On the sides of the helmet were auditory sensors, which were connected to a lateral conduit housing. Inside the helmet was a ComTech Series IV speaker system within the auditory sensor, which was equipped with a three-phase Sonic motivator and was connected via power conduits to atmospheric processing units, which included a Motivator sending unit and ventral power units.

In the ventral area of the helmet's interior, the edges were lined with Reifflex cellular padding. The interior of the helmet's faceplate contained a voice-activator housing, and the user would speak via a ComTech sensa-mic.

The same equipment also came with a dermal cross link. The equipment was between two Atmospheric transduction nozzles, which connected the Bliar filters to the atmospheric processing units. Various sensors, specifically those relating to threat targeting, were also incorporated into the helmet, although these were only active when its designated owner wore the helmet, as a security measure to ensure they could not be used by their enemies, as well as reducing the uniform's value on the black market.

These features included filters that screened out chemical and biological contaminants, heat-dispersal vents that maintained a consistent temperature, polarized lenses that collected non-visual data for display on the helmet's holographic head-up display as well as adjusting for various environmental conditions i.

However, Rebel Alliance member Wedge Antilles implied that the visual sensors for stormtrooper helmets had blind spots. The helmet also contained an IFF transponder readout that allowed a stormtrooper to identify his squadmates.

Over time, the helmets evolved and implemented new technology. For example, earlier models included only simple eye lenses with very few visual modes available, such as infrared and standard targeting systems, but as technology increased, the helmets began to feature more advanced visual targeting systems including:.

By ABY , stormtrooper helmets included updated sensors. The helmet's appearance was slightly modified to appear as a cross between the Phase II clone trooper armor and the original stormtrooper helmets. A number of variations were also introduced to accommodate alien species that were newly allowed to enroll in the Stormtrooper Corps.

Still, stormtrooper helmets shared a very common difficulty. A helmet needed to be powered by using a general code provided by a central system. This was meant to prevent piracy or stealing of helmets.

By doing this, if for any reason the helmet was stolen, the thief could not be able to access any of the visual modes of the helmet, making it very difficult to see through it.

A comlink with frequency-changing options was built into the trooper's helmet. The comlink used linked encoding sequences to rotate frequencies every few seconds while keeping all troopers in the unit synchronized. If a trooper's helmet was removed without the trooper first hitting the comlink's control stud most likely found on the under-rim of the helmet , the frequency coding routine was automatically deleted from that helmet.

The Comtech Series IV helmet speaker used three-phase sonic filtering for clear sound [5] for troopers, it was connected to the audio pickup. It also had a vocoder for talking to non-stormtroopers. Video recorders were included in some helmets. The backplate of the standard armor contained a power pack as well as a small supply of air see above.

Stack Overflow for Teams — Collaborate and share knowledge with a private group. Create a free Team What is Teams? Learn more. What do Stormtroopers wear when not wearing their armor? Ask Question. Asked 5 years, 9 months ago. Active 2 years, 2 months ago. Viewed 3k times. Improve this question. It is with great shame that I must report that I cannot find a picture of someone in a storm trooper helmet wearing a slave Leia costume. Why doesn't Finn count?

I don't think very many storm troopers would be wearing Poe's bomber jacket, etc.